MADE IN THE USA

| Home. | Danair Products | Tech Support | Contact Us |

AH-15 Glazing Tool  

Technical Support

The Daniar model AH-15-GL pneumatic Glazing Tool is designed for installing urethane glazing. It can be used with specialty tips for a wide range of specific applications. This tool is very adaptable. Contact Danair, Inc. today to see if this tool may help modify your existing AH-15 Automatic Hammer to better suit your application.

Performance - the Danair, Inc. Auto-HammerŪ has no trigger. Hammering action begins with a light pressure on the working surface and stops when lifted away. The Auto-HammerŪ will deliver over 1000 BLOWS PER MINUTE!

Quality - Since 1967 Danair, Inc. Products have been made in the U. S. with only the finest materials. Anytime during the LIFETIME of the tool a failure occurs because of workmanship or defective materials Danair, Inc. will repair or replace that tool.

Availability - Auto HammersŪ and parts are IN STOCK at many Danair, Inc. Dealer Locations around the world and the factory in Elko, Nevada. Orders received in the morning at the factory are often shipped the same day.

Danair, Inc. Products are proudly made in the U. S. backed by a Large Dealer Network and a Reliable, Responsive Manufacturer. Please contact us for more information.


Danair Inc.Ship to:
 
Local:Toll Free:
P.O. Box 25771320 Clarkson Drive Voice: 1-775-753-4411 1-800-232-6247
Elko, NV. 89803-2577Elko, NV 89801
E-mail: info@danairinc.com

Copyright © 2000-2024 All Rights Reserved - Danair, Inc.
Website design by: K. Schoppe-Hine