MADE IN THE USA

| Home. | Danair Products | Tech Support | Contact Us |

AH-15 PF Panel Fabric ToolŪ  

Technical Support

The Danair, Inc. model AH-15-PF pneumatic Panel Fabric Tool offers the Office Refurbishers and Partition Manufacturers, a replacement to cumbersome hammers and mallets. The installation of cords, splines and gaskets can now be accomplished with minimum effort and superior speed.

Performance - The Danair, Inc. model AH-15-PF has no trigger. Hammering action begins with a light pressure on the working surface and stops when lifted away. The AH-PF will deliver over 1000 BLOWS PER MINUTE!

Quality - Since 1967 Danair, Inc. products have been made in the U.S. with only the finest materials. Anytime during the LIFETIME of the tool a failure occurs because of workmanship or defective materials Danair, Inc. will repair or replace that tool.

Availability - Model AH-15-PF and parts are IN STOCK at many Danair, Inc. Dealer locations around the world and at any factory in Elko, Nevada. Orders received in the morning at the factory are most often shipped the same day.

Two models to choose from to control the depth of set. AH-15-PF with 2- 5/8" dia. Bumper and the AH-15-PF 9000 with a 3" dia. Bumper.

Danair, Inc. products are proudly made in the U. S. backed by a Large Dealer Network and a Reliable, Responsive Manufacturer. Please contact us for more information.


Danair Inc.Ship to:
 
Local:Toll Free:
P.O. Box 25771320 Clarkson Drive Voice: 1-775-753-4411 1-800-232-6247
Elko, NV. 89803-2577Elko, NV 89801
E-mail: info@danairinc.com

Copyright © 2000-2024 All Rights Reserved - Danair, Inc.
Website design by: K. Schoppe-Hine